HMC-500SH
Origin：Taiwan
High rigidity！ Stability！HMC features：
※ Machine frame adopts fully box-structured base to ensure long-term operation accuracy and stability of machine.
※ Feed rate is greatly uprate, while cutting capacity and machining speed are both raised. To be shorten the cycle time.
※ 3 axes configuration of pre-tension ball screw to eliminate thermal expansion. Direct-drive spindle assures the transmission accuracy and avoid lag error.
※ Horizontal machining center without APC. Space-saving and suitable for tailor-made production line.
※ Characteristics: stable, four slides with eight blocks supported the broad base to acquire the optimal dynamic balance during processing.
| MODEL | HMC-500SH |
| Travel of X/Y/Z-axis (mm) | 520x600x550 |
| Linear Guideway of X/Y/Z-axis | X:35mm Y:45mm Z:25mm |
| Ballscrews of X/Y/Z-axis | Ø40xPH10 |
| Distance from spindle nose to table | 160~710mm |
| Distance from spindle nose to table surface | 90~690mm |
| SPINDLE | |
| Spindle taper | BT-40 |
| Spindle nose outer diameter | 65mm |
| Spindle speed | 10000rpm |
| INDEX TABLE | |
| Table size | 500x500mm |
| Indexing degree | 1°or5°(Opt.：0.001°) |
| Max. loading capacity | 800kg |
| FEEDRATE | |
| Rapid traverse speed of X/Y/Z-axis | 24/16/24 m/min |
| Cutting feedrate of X/Y/Z-axis | 1-6000 mm/min |
| AUTOMATIC TOOL CHANGER | |
| Tool capaciy | 24 |
| Tool change type | Arm type |
| Max. diameter | Ø80 |
| Max. tool weight | 7kg |
| MOTOR | |
| Spindle motor | 7.5/11 kw |
| Servo motor of X/Y/Z/B-axis | 3.0/3.0/.3.0/3.0 kw |
| Spindle oil cooler motor | 0.2kw |
| Centralized lubrication system | 0.02kw |
| Index Table Hydraulic motor | 0.75kw |
| Coolant motor (for tools/chips) | 0.75kw |
| Chip conveyor motor | 0.2kw |
| ATC motor | 0.37kw |
| ACCURACY | |
| Positioning | +/- 0.004 |
| Repeatability | +/- 0.003 |
| MACHINE MEASUREMENT | |
| Dimension (WxHxD) | 3500x3900x3000mm |
| Net weight | 8,200kg |
| Item | Standard accessories | Optional accessories |
| 1 | 3 axes telescopic cover | Coolant thru spindle(CTS) |
| 2 | Full-enclosed splash guard | Transformer |
| 3 | 3 axes oil lubrication system with press-relief circuit | Buzzer |
| 4 | Screw type chip conveyor | Air conditioner for electric cabinet |
| 5 | Coolant system | 4th Roatry table & device |
| 6 | Pneumatic fitting for 3-point built up | 4th axis preparation(servo,wiring only) |
| 7 | Spindle air blast | Spindle oil cooler |
| 8 | Square type protective tube | Wash down device |
| 9 | Adjustment tools and toolbox | Oil skimmer |
| 10 | Heat exchanger for electric cabinet | Optical scale for 3 axes |
| 11 | Leveling pads and bolts | Tool setting probe |
| 12 | Working light | Work piece measuring probe |
| 13 | M30 auto power off | Scraper type chip conveyor + bucket |
| 14 | RS232/USB/CF interface | Oil mist collector |
| 15 | Warning light |